{"product_id":"3-8-high-pressure-jumper-hose","title":"3\/8\" High Pressure Jumper Hose","description":"\u003c!-- HOOK --\u003e\n\u003cp\u003eThe 3\/8\" High Pressure Jumper Hose is a double-wire Rampage Beast whip rated to 7,300 PSI and 310°F. It bridges your pump, unloader, reel, and gun without kinking the main hose. Crimped 3\/8\" MPT on both ends. Pick 5 ft or 10 ft.\u003c\/p\u003e\n\n\u003c!-- KEY FEATURES --\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble-wire 7,300 PSI build:\u003c\/strong\u003e Two steel braids handle far more than the single-wire whips rated around 4,000 PSI. Runs machines up to 5.5 GPM.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e310°F rated:\u003c\/strong\u003e Takes hot-water work that cooks cheaper whips, with more heat headroom than most OEM and import lines.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrimped 3\/8\" MPT both ends:\u003c\/strong\u003e Threads straight to standard trigger guns, ball valves, swivels, and quick connects with 3\/8\" fittings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmooth gray non-marking cover:\u003c\/strong\u003e Resists drag abrasion and won't streak the surfaces you're cleaning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut as a whip:\u003c\/strong\u003e Flexible where the main hose is stiff. Saves the main hose from kinking at the reel and saves your wrist at the gun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- SPECIFICATIONS --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBase hose\u003c\/th\u003e\n\u003ctd\u003eRampage Beast 3\/8\" double-wire, smooth gray non-marking\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInner diameter\u003c\/th\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e7,300 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperature rating\u003c\/th\u003e\n\u003ctd\u003e310°F\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEnd fittings\u003c\/th\u003e\n\u003ctd\u003e3\/8\" MPT, crimped both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMachine size\u003c\/th\u003e\n\u003ctd\u003eUp to 5.5 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLengths\u003c\/th\u003e\n\u003ctd\u003e5 ft or 10 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003c!-- WHAT'S INCLUDED \/ COMPATIBILITY --\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOne jumper hose, pre-crimped with 3\/8\" MPT fittings on both ends\u003c\/li\u003e\n  \u003cli\u003eYour choice of 5 ft or 10 ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo quick connects. Those thread on separately. The 3\/8\" MPT ends mate to standard trigger guns, ball valves, swivels, and quick connects through 3\/8\" fittings, on machines up to 5.5 GPM, hot or cold to 310°F. This is the high-pressure water hose, not the chemical line. Soft wash runs at low pressure, well under 300 PSI, so a wire-reinforced hose is overbuilt for SH and the crimp fittings corrode in chlorine. Keep this on plain water and run a dedicated \u003ca href=\"\/products\/soft-wash-hose\"\u003esoft wash hose\u003c\/a\u003e for your SH mix.\u003c\/p\u003e\n\n\u003c!-- HOW IT WORKS --\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eA whip is a short connector that bridges two points on the rig. Between the pump or unloader and the reel, it takes the hard bend that would otherwise stress the main hose at the reel inlet, and it helps the main hose lie flat on the reel. At the gun, a short whip adds flex, takes the strain off the gun connection, and cuts wrist fatigue compared with running the heavy main hose or a rigid lance straight to the trigger.\u003c\/p\u003e\n\n\u003c!-- PAIRS WELL WITH --\u003e\n\u003ch2\u003ePairs Well With\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/rampage-beast-pressure-washer-hose\"\u003eRampage BEAST Pressure Washer Hose\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/stainless-steel-quick-connect-plug\"\u003eStainless Steel Quick Connect Plug\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/aluminum-hose-reel\"\u003eAluminum Hose Reel\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/st1500-pressure-washer-gun\"\u003eST1500 Pressure Washer Gun\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- FAQ --\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eIs this the chemical hose or the pressure hose?\u003c\/h3\u003e\n\u003cp\u003eIt's the high-pressure water hose. Soft wash systems run at low pressure, so a wire-reinforced hose is overbuilt for SH, and the crimp fittings corrode in chlorine. For your SH mix, run a soft wash hose instead.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the end fittings?\u003c\/h3\u003e\n\u003cp\u003eCrimped 3\/8\" MPT on both ends. Quick connects aren't included, so thread on the QCs your rig uses. Go stainless on any connection that might see chlorine.\u003c\/p\u003e\n\n\u003ch3\u003eWHIP-5 or WHIP-10, which length do I need?\u003c\/h3\u003e\n\u003cp\u003eGo 5 ft for tight pump-to-reel or unloader jumps and surface-cleaner connections. Go 10 ft when you want more reach and flex at the gun end.\u003c\/p\u003e","brand":"Softwash Technologies","offers":[{"title":"5'","offer_id":46512683942077,"sku":"RAMP206-WHIP-5","price":25.0,"currency_code":"USD","in_stock":true},{"title":"10'","offer_id":46512683974845,"sku":"RAMP206-WHIP-10","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/5428\/7037\/files\/JumperHose.png?v=1773793021","url":"https:\/\/softwashtechnologies.com\/products\/3-8-high-pressure-jumper-hose","provider":"Softwash Technologies","version":"1.0","type":"link"}