{"product_id":"comet-p40-molded-collector-new-style","title":"Comet P40 Molded Collector (New Style)","description":"\u003c!-- HOOK --\u003e\n\u003cp\u003eThe Comet P40 Molded Collector is the new-style one-piece polypropylene manifold for the P40 diaphragm pump. Poly is why it handles SH where a brass head corrodes. Part 10002-14670-R replaces the old multi-piece manifold and cuts the leak points that came with it.\u003c\/p\u003e\n\n\u003c!-- KEY FEATURES --\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne-piece molded body:\u003c\/strong\u003e Replaces the old multi-piece P40 manifold, so there are fewer seams to leak and less to service.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePolypropylene resists SH:\u003c\/strong\u003e Poly is the reason Comet builds this collector in plastic instead of brass. It holds up to chlorine soft wash mix where metal heads corrode.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine OEM Comet part:\u003c\/strong\u003e Exact fit and correct dimensions for the P40, not a generic aftermarket casting you have to shim or fight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandles full P40 flow:\u003c\/strong\u003e Rated for the P40's 300 PSI and 14.5 GPM max. Most soft wash builds run it around 11 GPM.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBare collector only:\u003c\/strong\u003e The molded collector by itself. Mounting hardware, regulator, and foot aren't included, so you're not paying for parts you already have.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- SPECIFICATIONS --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMolded polypropylene, one-piece\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eCollector \/ manifold (new style)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax pressure\u003c\/th\u003e\n\u003ctd\u003e300 PSI (P40 rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003ctd\u003e14.5 GPM (P40 max; soft wash builds run ~11 GPM)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003eInlet 1\", Outlet 3\/4\", Bypass 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical compatibility\u003c\/th\u003e\n\u003ctd\u003eSodium hypochlorite, surfactants\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax fluid temp\u003c\/th\u003e\n\u003ctd\u003e140°F\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003c!-- WHAT'S INCLUDED \/ COMPATIBILITY --\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOne molded polypropylene collector (part 10002-14670-R)\u003c\/li\u003e\n  \u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits the new-style Comet P40 diaphragm pump. It doesn't include the regulator, foot, elbow, or spacers. Those ship only in the full retrofit kit (10002-14670KIT). If your P40 uses the old multi-piece manifold, this one-piece collector isn't a straight drop-in, so confirm your pump style first or go with the retrofit kit. It's not for the Comet MC25, which takes different parts.\u003c\/p\u003e\n\n\u003c!-- HOW IT WORKS --\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eThe collector is the one-piece body on the discharge end of the P40's three-diaphragm pump. Fluid comes in through the central inlet, the diaphragms push it through the collector's flow paths, check valves keep it moving one direction, and O-rings seal the collector to the valve seats. The outlet and bypass ports send flow to your gun and back to the tank.\u003c\/p\u003e\n\u003cp\u003eComet moved the P40 to a one-piece poly collector to kill the leak points of the old multi-part manifold and make service faster. Run SH through it all day. The only discipline is the same as any soft wash rig: rinse and neutralize after each job, since surfactants slowly stress-crack poly if you leave them sitting.\u003c\/p\u003e\n\n\u003c!-- PAIRS WELL WITH --\u003e\n\u003ch2\u003ePairs Well With\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/comet-p40-repair-kit\"\u003eComet P40 Repair Kit\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/comet-p40-soft-wash-pump\"\u003eComet P40 Soft Wash Pump\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/comet-p40-oil-kit\"\u003eComet P40 Oil Kit\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/comet-p40-plumbing-kit\"\u003eComet P40 Plumbing Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- FAQ --\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eIs polypropylene safe with sodium hypochlorite?\u003c\/h3\u003e\n\u003cp\u003eYes. Poly is the reason Comet builds the P40 collector in plastic instead of brass. It's rated satisfactory for sodium hypochlorite, so it won't corrode in chlorine soft wash mix. Rinse and neutralize after each job, since surfactants slowly stress-crack poly over time.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the Comet P40 collector come with the regulator and pump foot?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the bare collector only. The regulator, foot, elbow, and two spacers ship in the full retrofit kit (10002-14670KIT). If you need those parts too, buy the kit instead of the bare collector.\u003c\/p\u003e\n\n\u003ch3\u003eWill this collector fit my old-style P40?\u003c\/h3\u003e\n\u003cp\u003eThis is the new-style one-piece collector. Old-style P40s used a multi-piece manifold, so this isn't always a straight swap. Check your pump style before ordering, or run the full retrofit kit to convert it.\u003c\/p\u003e","brand":"Softwash Technologies","offers":[{"title":"Default Title","offer_id":47660179456189,"sku":"10002-14670-R","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/5428\/7037\/files\/10002-14670-R_1000x1000-595x595.jpg?v=1784304908","url":"https:\/\/softwashtechnologies.com\/products\/comet-p40-molded-collector-new-style","provider":"Softwash Technologies","version":"1.0","type":"link"}