{"product_id":"mtm-hydro-rotojet-turbo-nozzle","title":"MTM Hydro RotoJet Turbo Nozzle","description":"\u003c!-- HOOK --\u003e\n\u003cp\u003eThe RotoJet turbo nozzle spins a 0° jet into a 25° rotating cone, so you cut like a pencil tip and cover like a fan. It's German-made, brass core with ceramic internals, and it has no gears or bearings to wear out. Sized to your machine at 5,000 or 5,800 PSI.\u003c\/p\u003e\n\n\u003c!-- KEY FEATURES --\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0° jet in a rotating cone:\u003c\/strong\u003e Cuts like a 0° tip and covers like a 25° fan, clearing concrete, masonry, and heavy buildup faster than a fixed tip.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGerman-made brass and ceramic:\u003c\/strong\u003e Brass core with a ceramic orifice and rotor. The ceramic holds the pattern and outlasts throwaway rotary tips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo gears, teeth, or bearings:\u003c\/strong\u003e A ceramic pin rides in a ceramic seat. Fewer moving parts means fewer ways for it to fail.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo sizes, matched to your GPM:\u003c\/strong\u003e 7.0 orifice at 5,000 PSI or 11.0 orifice at 5,800 PSI. The orifice number is the GPM the tip is built for.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRebuildable, not disposable:\u003c\/strong\u003e When the ceramic wears, drop in a repair kit matched to your orifice and PSI instead of tossing the nozzle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShips bare, 1\/4\" female inlet:\u003c\/strong\u003e Threads onto a lance. Add a 1\/4\" quick-connect plug (sold separately) to run it in a QC setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- SPECIFICATIONS --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand \/ origin\u003c\/th\u003e\n\u003ctd\u003eMTM Hydro RotoJet, made in Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHigh-pressure rotating turbo nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax pressure\u003c\/th\u003e\n\u003ctd\u003e5,000 PSI (7.0) or 5,800 PSI (11.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOrifice size\u003c\/th\u003e\n\u003ctd\u003e7.0 or 11.0 (match to your machine's GPM)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003ctd\u003e~7.0 GPM (7.0) or ~11.0 GPM (11.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpray pattern\u003c\/th\u003e\n\u003ctd\u003e0° jet rotated into a 25° cone\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWetted materials\u003c\/th\u003e\n\u003ctd\u003eBrass core, ceramic orifice and rotor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCover\u003c\/th\u003e\n\u003ctd\u003eBlack plastic jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInlet\u003c\/th\u003e\n\u003ctd\u003e1\/4\" female (confirm BSP vs NPT for your fittings; quick-connect plug not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eServiceable\u003c\/th\u003e\n\u003ctd\u003eYes. Rebuild kit matched to orifice and PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e16.0086 (7.0 \/ 5,000 PSI), 16.0102 (11.0 \/ 5,800 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003c!-- WHAT'S INCLUDED \/ COMPATIBILITY --\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOne RotoJet turbo nozzle in your chosen size (7.0 or 11.0)\u003c\/li\u003e\n  \u003cli\u003eBare female-threaded nozzle. No quick-connect plug included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits gas and high-flow pressure washers matched by GPM and PSI. The orifice number is the GPM the tip is sized for, so a 7 GPM machine takes the 7.0 and an 11 GPM machine takes the 11.0. Oversize it and you lose pressure. Undersize it and you backload the pump. The inlet is 1\/4\" female, so thread in a 1\/4\" quick-connect plug (not included) and confirm BSP vs NPT before you buy fittings. It's not for cars, siding, stucco, wood, shingles, or any soft wash chemical.\u003c\/p\u003e\n\n\u003c!-- HOW IT WORKS --\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eWater forces through a small ceramic orifice into a 0° jet, and a ceramic pin spins that jet into a 25° cone. You get the impact of a 0° tip across a wider path, which clears concrete, brick, pavers, stone, and equipment faster than a fixed fan. Always start it pointing down so the ceramic pin seats before the water hits full pressure. Start it aimed up and you risk chipping the internals. It etches and gouges, so keep it on hard surfaces and off wood, siding, stucco, paint, screens, and vehicles.\u003c\/p\u003e\n\u003cp\u003eIt runs plain high-pressure water, not chemical. The brass corrodes if SH sits on it, so don't run bleach through it. For chemical, use a downstream injector or an X-Jet at low pressure, and flush the nozzle with fresh water if it ever contacts SH.\u003c\/p\u003e\n\n\u003c!-- PAIRS WELL WITH --\u003e\n\u003ch2\u003ePairs Well With\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/in-line-filter\"\u003eIn-line Filter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/stainless-steel-quick-connect-plug\"\u003eStainless Steel Quick Connect Plug\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/aluminum-extension-wand-with-qcs\"\u003eAluminum Extension Wand with QCs\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/gun-and-wand-assembly-4500-psi\"\u003eGun and Wand Assembly 4500 PSI\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- FAQ --\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size RotoJet turbo nozzle do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the orifice to your machine's GPM. The 7.0 suits machines up to about 7 GPM at 5,000 PSI, and the 11.0 suits machines up to about 11 GPM at 5,800 PSI. Oversize loses pressure, and undersize backloads the pump.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use a turbo nozzle for soft washing?\u003c\/h3\u003e\n\u003cp\u003eNo. It's a high-pressure water tip, not a chemical applicator, and the brass corrodes if SH sits on it. For chemical, run a downstream injector or an \u003ca href=\"\/products\/x-jet-m5-nozzle\"\u003eX-Jet M5 Nozzle\u003c\/a\u003e at low pressure, and flush the turbo with fresh water if it ever contacts SH.\u003c\/p\u003e\n\n\u003ch3\u003eWhy do I have to start a turbo nozzle pointing down?\u003c\/h3\u003e\n\u003cp\u003eStarting down lets the ceramic pin seat in its ceramic seat before the jet hits full pressure. Start it aimed up and the pin can chip the internals. Point it down, pull the trigger, then bring it onto the surface.\u003c\/p\u003e","brand":"Softwash Technologies","offers":[{"title":"7.0 at 5000 PSI","offer_id":47682403467453,"sku":"16.0086","price":74.0,"currency_code":"USD","in_stock":true},{"title":"11.0 at 5800 PSI","offer_id":47682403500221,"sku":"16.0102","price":107.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/5428\/7037\/files\/7b3689b4a9c3cba2a69728538d0a.webp?v=1784566713","url":"https:\/\/softwashtechnologies.com\/products\/mtm-hydro-rotojet-turbo-nozzle","provider":"Softwash Technologies","version":"1.0","type":"link"}