The Water Fed Pole Fill N Go Kit is a self-contained pure-water window cleaning rig with a 50-gallon onboard tank. Fill it anywhere, and the onboard RO/DI makes spot-free water on site with no jobsite hookup. Pick a single or dual operator setup and your pole height.
Key Features
-
50-gallon onboard tank: Fill it and go. No jobsite water hookup, so you work where a hose-fed cart can't.
-
Onboard RO/DI purification: A sediment and carbon pre-filter, a 40" low-pressure RO membrane on a 12v boost pump, and a DI stage take your fill water to near-zero TDS.
-
Single or dual operator: Run one delivery side, or two pumps, controllers, reels, and poles off the same tank and filtration.
-
Three pole heights: The Tucker 30 reaches 26 ft, the Tucker 40 reaches 36 ft, and the Tucker HM-50 reaches 46 ft. The 30 and 40 take add-on sections later.
-
RHG 12v pump and digital flow controller: A USA-made delivery pump with a controller to set and conserve your flow.
-
150' hose reel: 3/8" pure-water hose, one reel per operator.
Water Fed Pole Fill N Go Kit Specifications
| Product type |
Mobile pure-water RO/DI window cleaning system with onboard tank |
| Variants |
Single or Dual user, with Tucker 30, Tucker 40, or Tucker HM-50 pole |
| Tank |
50 gallons, onboard |
| Frame |
Powder-coated aluminum |
| Filtration |
Sediment and carbon pre-filter, 40" low-pressure RO membrane (12v boost pump), DI final stage |
| Delivery |
RHG USA-made 12v pump and digital flow controller, one per operator |
| Hose |
150 ft of 3/8" hose per reel |
| Pole reach |
Tucker 30 = 26 ft, Tucker 40 = 36 ft, Tucker HM-50 = 46 ft |
| Power |
12V |
| Chemical compatibility |
Pure water only. No chemicals, no SH. |
| Origin |
USA-made Tucker and RHG components |
What's Included
Single User setup:
- One Tucker water-fed pole in your chosen height
- 50-gallon tank on a powder-coated aluminum frame
- RHG USA-made 12v pump and a digital flow controller
- Hose reel with 150' of 3/8" hose
- Sediment and carbon pre-filtration, 40" low-pressure RO membrane with 12v boost pump, and a DI final stage
Dual User setup:
- Two Tucker water-fed poles in your chosen height
- 50-gallon tank on a powder-coated aluminum frame
- Two RHG USA-made 12v pumps and two digital flow controllers
- Two hose reels with 150' of 3/8" hose each
- Sediment and carbon pre-filtration, 40" low-pressure RO membrane with 12v boost pump, and a DI final stage
You supply the fill water. It's a pure-water system, so it never runs chemicals of any kind. The dual setup runs two operators off the one tank and filtration, so a single-pole job and a crew job use the same rig.
How It Works
Fill the 50-gallon tank from any water source. A 12v boost pump pushes that water through the purification train. The sediment and carbon pre-filter pulls out debris and the chlorine and chloramine that would wreck the membrane, the 40" low-pressure RO membrane strips most of the dissolved solids, and the DI stage polishes it to near-zero TDS.
An RHG 12v delivery pump then sends that pure water, at the flow you set on the controller, through the 150' reel hose to a carbon-fiber water-fed pole and brush. You scrub and rinse, and the glass dries spot-free with no squeegee and no chemicals. The dual-user build runs two delivery sides off the one tank and filtration, so two operators work at once.
Pairs Well With
Frequently Asked Questions
What's the difference between the single and dual user Fill N Go Kit?
Single gives you one pole, one 12v pump, one reel with 150' of hose, and one flow controller off the 50-gallon RO/DI system. Dual doubles the delivery side, two pumps, controllers, reels, and poles, so two operators run off the same tank and filtration. Pick dual if you crew your jobs.
How high does each Fill N Go pole reach?
The Tucker 30 reaches 26 ft, the Tucker 40 reaches 36 ft, and the Tucker HM-50 reaches 46 ft. The 30 and 40 carbon-fiber poles take add-on sections up to about 50 ft as your work grows. Pick by the tallest glass you clean.
Can I run SH or soap through the Fill N Go Kit?
No. It's a pure-water system. Chlorine, chloramine, soap, and SH foul the RO membrane and burn through the DI resin. The carbon pre-filter is there to strip chlorine before it reaches the membrane. Keep every chemical out.
