Remco Pumps and Bundles
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Recently Viewed Products
How to Choose the Right Remco Soft Wash Pump
Three questions sort this out fast: how much flow you actually need, 12V or 24V, and whether you want just the pump or a full bundle that's ready to run on day one. Get those right and the rest of the rig falls into place.
Flow rate (GPM)
The 5.3 GPM 12V is the budget entry point. It's fine for a solo operator doing residential houses, fences, and smaller roofs. The 7 GPM 12V is the most popular choice for general residential soft washing because it gives you enough reach for two-story work without draining your battery as fast as the bigger models. The Zeus 14 GPM 24V is built for commercial volume: large roofs, multi-story buildings, and crews running long shots from the truck.
12V vs 24V power
Both 12V Remco pumps run on standard 12V power, so they're easy to wire to a single battery and you can service them anywhere. The Zeus 24V SmoothFlo steps up to 24V, which lets the pump push more volume at higher pressure (14 GPM at 150 PSI vs. the 12V's 100 PSI) without overheating the motor. If you're spraying all day or running long hose lengths, the 24V holds pressure better at the gun. If you're starting out or running shorter days, 12V is the right call.
Pump only vs. complete bundle
Every Remco bundle on this page is built around the matching pump and includes a proportioner, gun, hose with reel, plumbing kit, and a few extras. Every part is pre-matched and sized for the pump it ships with. Buy the bundle if you want a known-good setup out of the box and don't want to hunt for fittings. Buy the standalone pump if you already have a rig and you're just replacing a worn-out unit or upgrading from a different pump.
Remco Soft Wash Pump Sizing Chart
| Job type | Recommended Remco pump |
|---|---|
| Solo operator, residential houses and fences | Remco 12V 5.3 GPM |
| General residential soft washing, two-story work | Remco 12V 7 GPM |
| Commercial roofs, multi-story, all-day production | Remco Zeus 24V 14 GPM |
What's inside every Remco soft wash pump
The reason Remco shows up on so many professional rigs is the build. Every pump on this page uses an electric diaphragm design with Viton and Santoprene wetted parts, which is the combination that holds up to long-term contact with 12.5% sodium hypochlorite. The motors are sealed against moisture, dirt, and chemical mist, which matters because soft wash rigs live in a corrosive environment. The 12V pumps ship with 3/4" quick-attach fittings; the Zeus 24V uses 1" FNPT for the higher flow. All three come with Remco's 1-year limited warranty (90 days on commercial use).
Related Categories
- Soft Wash Sprayers
- Complete Soft Wash Bundles
- All Soft Washing Equipment
- Soft Wash Chemicals & Surfactants
- Soft Wash Accessories & Fittings
Frequently Asked Questions
Which Remco soft wash pump do I need?
Match the pump to the work. The 5.3 GPM 12V is right for a solo operator doing houses and smaller roofs. The 7 GPM 12V is the residential workhorse, with enough flow for two-story work without burning through batteries. The Zeus 14 GPM 24V is built for commercial-scale jobs and all-day production. If you're between sizes, size up. A larger pump running under light load stays cooler and lasts longer than a smaller pump pushed to its ceiling.
What's the difference between the Remco 12V pumps and the Zeus 24V?
The 12V pumps top out at 100 PSI and 7 GPM, run on standard 12V power, and are the simpler, cheaper option. The Zeus 24V SmoothFlo runs on 24V, hits 150 PSI at 14 GPM, and holds pressure better at the end of a long hose. The Zeus also uses 1" FNPT fittings instead of 3/4" quick-attach, so the plumbing is sized for higher flow.
Should I buy a Remco pump or a Remco bundle?
If you're building or replacing a complete soft wash rig, the bundle saves time and removes the guesswork. Every part is sized and matched to the pump, including the proportioner, gun, hose, reel, and plumbing kit. If you already have a working rig and just need to swap in a new pump, buy the pump on its own.
Are Remco soft wash pumps chemical resistant?
Yes. Every Remco pump on this page uses Viton and Santoprene wetted parts, which is the combination that holds up to 12.5% sodium hypochlorite. The motors are sealed against chemical mist, moisture, and corrosion, which is what gives these pumps their service life on a soft wash rig.
What's the warranty on a Remco soft wash pump?
Remco covers all the pumps on this page with a 1-year limited warranty for defects in materials and workmanship. Commercial use (which most soft washing pros fall under) is covered for 90 days. Damage from misuse, improper installation, or chemicals outside the recommended range isn't covered.
How long does a Remco soft wash pump last?
With daily commercial use and proper care, expect years of service out of any Remco pump on this page. The Zeus 24V tends to outlast the 12V models because it runs cooler at the same workload. The first parts to wear are usually the diaphragms and valve seals on the wet end. Flushing the pump with clean water at the end of every shift will do more for its service life than anything else.