The 3/8" High Pressure Jumper Hose is a double-wire Rampage Beast whip rated to 7,300 PSI and 310°F. It bridges your pump, unloader, reel, and gun without kinking the main hose. Crimped 3/8" MPT on both ends. Pick 5 ft or 10 ft.
Key Features
-
Double-wire 7,300 PSI build: Two steel braids handle far more than the single-wire whips rated around 4,000 PSI. Runs machines up to 5.5 GPM.
-
310°F rated: Takes hot-water work that cooks cheaper whips, with more heat headroom than most OEM and import lines.
-
Crimped 3/8" MPT both ends: Threads straight to standard trigger guns, ball valves, swivels, and quick connects with 3/8" fittings.
-
Smooth gray non-marking cover: Resists drag abrasion and won't streak the surfaces you're cleaning.
-
Cut as a whip: Flexible where the main hose is stiff. Saves the main hose from kinking at the reel and saves your wrist at the gun.
Specifications
| Base hose |
Rampage Beast 3/8" double-wire, smooth gray non-marking |
| Inner diameter |
3/8" |
| Max working pressure |
7,300 PSI |
| Temperature rating |
310°F |
| End fittings |
3/8" MPT, crimped both ends |
| Machine size |
Up to 5.5 GPM |
| Lengths |
5 ft or 10 ft |
What's Included
- One jumper hose, pre-crimped with 3/8" MPT fittings on both ends
- Your choice of 5 ft or 10 ft
No quick connects. Those thread on separately. The 3/8" MPT ends mate to standard trigger guns, ball valves, swivels, and quick connects through 3/8" fittings, on machines up to 5.5 GPM, hot or cold to 310°F. This is the high-pressure water hose, not the chemical line. Soft wash runs at low pressure, well under 300 PSI, so a wire-reinforced hose is overbuilt for SH and the crimp fittings corrode in chlorine. Keep this on plain water and run a dedicated soft wash hose for your SH mix.
How It Works
A whip is a short connector that bridges two points on the rig. Between the pump or unloader and the reel, it takes the hard bend that would otherwise stress the main hose at the reel inlet, and it helps the main hose lie flat on the reel. At the gun, a short whip adds flex, takes the strain off the gun connection, and cuts wrist fatigue compared with running the heavy main hose or a rigid lance straight to the trigger.
Pairs Well With
Frequently Asked Questions
Is this the chemical hose or the pressure hose?
It's the high-pressure water hose. Soft wash systems run at low pressure, so a wire-reinforced hose is overbuilt for SH, and the crimp fittings corrode in chlorine. For your SH mix, run a soft wash hose instead.
What are the end fittings?
Crimped 3/8" MPT on both ends. Quick connects aren't included, so thread on the QCs your rig uses. Go stainless on any connection that might see chlorine.
WHIP-5 or WHIP-10, which length do I need?
Go 5 ft for tight pump-to-reel or unloader jumps and surface-cleaner connections. Go 10 ft when you want more reach and flex at the gun end.
